Product Category
Our Product Range
Comprehensive connector alternatives, matched accessories and harsh-environment harness protection components for project RFQs.
Product Categories
Browse by wiring project requirement
Start with a category, then submit part numbers, drawings or a BOM for equivalent review and quotation.
Circular connector solutions
MIL-SPEC Connectors
D38999, MIL-DTL-26482, Micro-D and military circular connector equivalent sourcing.
View categoryMatched connector accessories
Connector Accessories
M85049 backshells, dust caps, contacts, seals, cable clamps and EMI shielded accessories.
View category
Sealed vehicle connector systems
Deutsch Connectors
DT, DTM, DTP and DTHD sealed connector kits for vehicles, UAV and motorsport wiring.
View category
Complete harness protection
Harness Protection
DR25 equivalent tubing, heat shrink boots, molded parts, adhesive, sleeving and shielding.
View category
Project BOM coordination
UAV / Motorsport Wiring Kits
Project kits combining connectors, backshells, boots, tubing, sleeving, adhesive and accessories.
View category
Miniature bayonet circular connectors
MIL-DTL-26482 Connectors
Compatible PT, MS311x and MS312x miniature bayonet connector alternatives.
View category
Threaded power and signal connectors
MIL-DTL-5015 Connectors
Compatible MS310x and 97-style threaded circular connector alternatives.
View category
Reverse-bayonet power and signal connectors
VG95234 Connectors
Compatible reverse-bayonet plugs, receptacles and rear-accessory configurations.
View category
High-density harsh-environment connectors
MIL-DTL-38999 Connectors
Compatible D38999 Series I–IV plugs and receptacles with backshell matching.
View categoryAvailable Products
Products available for technical review
Select a product series or send the original part number. Final specifications are confirmed against the application, drawing or sample requirement.
MIL-DTL-38999 Connectors
D38999/20WB35PN Compatible 13-Contact Wall Mount Receptacle
TC-D38999/20WB35PN
D38999/20WB35PN compatible Series III wall-mount receptacle with 13 pin contacts for rugged aerospace, defense and industrial harness interfaces.
View Product
MIL-DTL-38999 Connectors
D38999/20 Wall Mount Receptacle
D38999/20
D38999/20 style wall-mount receptacle alternative with configuration review for shell size, insert arrangement, contacts, keying and finish.
View ProductMIL-DTL-38999 Connectors
D38999/20ZC8PN Compatible 8-Contact Wall Mount Receptacle
TC-D38999/20ZC8PN
D38999/20ZC8PN compatible Series III wall-mount receptacle with pin contacts, normal keying and a zinc-nickel finish reference.
View Product
Connector Accessories
M85049/69-17W Compatible Straight Shrink Boot Adapter
TC-M85049/69-17W
M85049/69-17W compatible straight shrink-boot adapter for size-17 D38999 Series III and IV connector interfaces.
View ProductConnector Accessories
M85049/88-17Z03 Compatible Straight Banding Backshell
TC-M85049/88-17Z03
M85049/88-17Z03 compatible straight self-locking banding backshell for shield-braid termination on rugged circular connectors.
View Product
Harness Protection
DR-25 Equivalent Fluid-Resistant Heat Shrink Tubing
TC-DR25
DR-25 equivalent 2:1 fluid-resistant elastomeric heat shrink tubing for motorsport, aerospace and harsh-environment wiring harnesses.
View Product
Harness Protection
S1125 Equivalent Two-Part Epoxy Adhesive
TC-S1125
S1125 equivalent two-part epoxy adhesive for bonding and sealing System 25-type molded boots, breakouts and cable transitions.
View Product
Harness Protection
Molded Heat Shrink Boot for Connector Transitions
TC-HSB
Molded heat shrink boot for connector-to-cable transitions, strain relief, sealing and mechanical protection in harsh-environment harnesses.
View Product
MIL-DTL-26482 Connectors
PT06A-16-26P Compatible 26-Pin Bayonet Straight Plug
TC-PT06A-16-26P
PT06A-16-26P compatible high-density bayonet straight plug with 26 pin solder contacts for multi-circuit cable assemblies.
View Product
MIL-DTL-26482 Connectors
PT07E-10-6S Compatible 6-Socket Jam Nut Receptacle
TC-PT07E-10-6S
PT07E-10-6S compatible miniature jam-nut receptacle with six socket solder contacts and environmental rear-seal configuration.
View Product
MIL-DTL-26482 Connectors
PT06A-10-6P Compatible 6-Pin Bayonet Straight Plug
TC-PT06A-10-6P
PT06A-10-6P compatible miniature bayonet straight plug with six pin solder contacts for compact rugged cable assemblies.
View Product
MIL-DTL-38999 Connectors
D38999/24WB35PN Compatible 13-Contact Jam Nut Receptacle
TC-D38999/24WB35PN
D38999/24WB35PN compatible Series III jam-nut receptacle with 13 pin contacts for compact single-hole panel mounting.
View ProductMIL-DTL-38999 Connectors
D38999/20FB35SN Compatible 13-Contact Wall Mount Receptacle
TC-D38999/20FB35SN
D38999/20FB35SN compatible Series III wall-mount receptacle with 13 socket contacts and an electroless-nickel finish reference.
View Product
Harness Protection
DR25 Equivalent Heat Shrink Tubing
TC-DR25-EQ
DR25 equivalent heat shrink tubing for rugged wiring harness protection.
View ProductHarness Protection
S1125 Equivalent Adhesive
TC-S1125-EQ
Adhesive option for molded boots, harness transitions and sealed assemblies.
View ProductHarness Protection
Heat Shrink Boot for Connector
TC-HSB-CONN
Molded heat shrink boot for connector transitions, strain relief and harness protection.
View Product
Connector Accessories
Connector Contacts, Seals and Accessory Kit
TC-CONTACT-SEAL-KIT
Matched crimp contacts, cavity seals and sealing plugs for D38999, DEUTSCH-style and other rugged connector assemblies.
View Product
Connector Accessories
D38999 Compatible Dust Cap and Protective Cover
TC-D38999-CAP
D38999 compatible dust cap and protective cover matched by shell size, connector side, finish, seal and attachment style.
View ProductConnector Accessories
EMI Shielded Backshell for MIL-SPEC Circular Connectors
TC-EMI-BS
EMI shielded backshell for 360-degree braid termination, cable strain relief and protected transitions on rugged circular connectors.
View Product
Connector Accessories
M85049 Compatible 90-Degree Backshell for D38999 Connectors
TC-M85049-90
M85049 compatible 90-degree backshell for compact cable routing, strain relief and shield termination behind circular connectors.
View ProductConnector Accessories
M85049 Compatible Straight Backshell for D38999 Connectors
TC-M85049-ST
M85049 compatible straight backshell for cable strain relief, shield termination and controlled rear cable routing on circular connectors.
View Product
Deutsch Connectors
DEUTSCH DTHD Compatible Single-Pin Connector Kit
TC-DTHD-KIT
DEUTSCH DTHD compatible single-cavity sealed connector kit for rugged high-current power and ground circuits.
View Product
Deutsch Connectors
DEUTSCH DTP Compatible High-Current Connector Kit
TC-DTP-KIT
DEUTSCH DTP compatible sealed connector kit for higher-current power circuits in vehicles, machinery and rugged equipment.
View Product
Deutsch Connectors
DEUTSCH DTM Compatible Sealed Connector Kit
TC-DTM-KIT
DEUTSCH DTM compatible sealed connector kit for compact low-current signal, sensor and control harnesses.
View ProductDeutsch Connectors
Deutsch DT Connector Kit
TC-DT-KIT
Sealed DT-style connector kit for vehicle, motorsport and rugged industrial wiring.
View ProductMIL-DTL-26482 Connectors
MIL-DTL-26482 Receptacle
TC-26482-REC
Receptacle option for MIL-DTL-26482 style circular connector replacement and sourcing programs.
View ProductMIL-DTL-26482 Connectors
MIL-DTL-26482 Plug
TC-26482-PLUG
Lower-cost military circular plug alternative for rugged industrial, repair and control wiring applications.
View ProductMIL-DTL-38999 Connectors
D38999/26 Straight Plug
TC-D38999-26
Straight plug style D38999 compatible option for rugged harness cable assemblies.
View ProductMIL-DTL-38999 Connectors
D38999/24 Jam Nut Receptacle
TC-D38999-24
Jam nut receptacle style connector alternative for compact panel mounting and harsh-environment systems.
View ProductDeutsch Connectors
DTF13-2P DEUTSCH DT 2-Position Right-Angle PCB Header
DTF13-2P
Reference sourcing page for the active TE/DEUTSCH DTF13-2P right-angle, two-position PCB header.
View ProductDeutsch Connectors
DT13-48PABCD-R015 DEUTSCH DT 48-Position PCB Header
DT13-48PABCD-R015
Reference sourcing page for the active TE/DEUTSCH DT13-48PABCD-R015 48-position right-angle PCB header.
View ProductDeutsch Connectors
1011-263-0405 DEUTSCH DT 4-Position Straight Backshell
1011-263-0405
Reference sourcing page for the active TE/DEUTSCH 1011-263-0405 four-position straight backshell.
View ProductMIL-DTL-26482 Connectors
MS3116 / PT06 MIL-DTL-26482 Series I Straight Plug
MS3116 / PT06
Family-level draft for MS3116 and PT06 MIL-DTL-26482 Series I solder-contact straight plugs.
View ProductConnector Accessories
M85049/51 90-Degree Strain-Relief Backshell Family
M85049/51
Family-level draft for M85049/51 90-degree strain-relief connector accessories.
View ProductConnector Accessories
M85049/52 Straight Strain-Relief Backshell Family
M85049/52
Family-level draft for M85049/52 straight strain-relief connector accessories.
View Product
MIL-DTL-38999 Connectors
MIL-DTL-38999 Series III Wall-Mount Receptacle Sourcing Option
TC-PILOT-D38999-WMR
Series III style wall-mount receptacle sourcing support matched from the complete original part number, drawing or mating interface.
View Product
Connector Accessories
M85049 / AS85049 90-Degree Backshell and Strain-Relief Option
TC-PILOT-M85049-90
90-degree backshell sourcing option reviewed against connector shell size, rear interface, cable bundle and shielding requirements.
View Product
Connector Accessories
Threaded Protective Cap with Retention Chain for D38999-Style Interfaces
TC-PILOT-D38999-CAP
Threaded protective-cap sourcing option with retention chain, selected from the connector interface and environmental requirements.
View Product
Deutsch Connectors
Deutsch DT-Style 2-Way Sealed Connector Kit with Contacts and Locks
TC-PILOT-DT-2W-KIT
Non-branded DT-style two-way sealed connector kit supplied with mating housings, contacts and secondary locks for review.
View ProductCategory Index
Product category overview
Browse the current connector, accessory and harness protection range by application requirement.
| Category | Solution Scope | Typical Products | Products |
|---|---|---|---|
| MIL-SPEC Connectors | Circular connector solutions | D38999, MIL-DTL-26482, Micro-D, military circular connector equivalents | 0 |
| Connector Accessories | Matched connector accessories | M85049 backshell, D38999 dust cap, EMI shielded backshell, contacts and seals | 11 |
| Deutsch Connectors | Sealed vehicle connector systems | Deutsch DT kit, Deutsch DTM connector, Deutsch DTP high current, DTHD connector | 8 |
| Harness Protection | Complete harness protection | DR25 equivalent, heat shrink boot, S1125 equivalent adhesive, EMI shielding sleeving | 6 |
| UAV / Motorsport Wiring Kits | Project BOM coordination | UAV wiring kit, motorsport harness material kit, defense harness protection kit | 0 |
| MIL-DTL-26482 Connectors | Miniature bayonet circular connectors | MIL-DTL-26482 connector alternative, MIL-C-26482 connector, PT connector equivalent, MS3116 connector alternative | 6 |
| MIL-DTL-5015 Connectors | Threaded power and signal connectors | MIL-DTL-5015 connector alternative, MIL-C-5015 connector, MS3106 replacement, MS3102 receptacle | 0 |
| VG95234 Connectors | Reverse-bayonet power and signal connectors | VG95234 connector alternative, VG95234 reverse bayonet connector, VG95234 plug, VG95234 receptacle | 0 |
| MIL-DTL-38999 Connectors | High-density harsh-environment connectors | MIL-DTL-38999 connector alternative, D38999 connector supplier, D38999/20, D38999/24, D38999/26 | 8 |
RFQ support
Send Your Part Number, BOM or Harness Requirement
We review D38999, M85049, Deutsch, DR25, boots, adhesive, sleeving and rugged connector requirements for equivalent sourcing and project quotation.