MIL-DTL-38999 Series III · catalog configuration
D38999/20K44PN
D38999/20K44PN is a supplier-listed Series III style square-flange receptacle configuration. Kaida lists shell size 09, four contact positions, crimp termination and passivated stainless steel.
Product number D38999/20K44PN
- Series
- Series III
- Shell / insert
- 09 shell (supplier-listed)
- Contact positions
- 4 positions (supplier-listed)
- Material / finish
- Passivated stainless steel (supplier listing)
Description
D38999/20K44PN is a supplier-listed Series III style square-flange receptacle configuration. Kaida lists shell size 09, four contact positions, crimp termination and passivated stainless steel. Use the complete supplier configuration and controlled drawing to confirm the offered unit.
Configuration checklist
- Match the full ordering code and insert face to the supplied drawing.
- Confirm the mating half, contact gender, key position and coupling interface.
- Check shell style, rear configuration, cable exit and any accessory interface.
- Request the documents required for the offered unit; catalog values are not unit test results.
Technical Data
Ordering-code and insert data are catalog references. Electrical, environmental and mating-life values shown as catalog or family figures do not certify the supplied unit. Confirm the exact configuration and required evidence against its controlled drawing.
| Series and shell style | Series III style; square-flange receptacle |
|---|---|
| Shell size / insert arrangement | 09 shell (supplier-listed) |
| Contact quantity and size mix | 4 positions (supplier-listed) |
| Coupling | Threaded |
| Contact / termination | Crimp pin configuration (supplier listing) |
| Shell material and finish | Passivated stainless steel (supplier listing) |
| Complete manufacturer model | D38999/20K44PN |
Applications
These are selection and sourcing contexts for the listed catalog configuration. Suitability depends on the equipment interface, operating conditions and supplied-item documentation.
Buyer Q&A
Which configuration does the manufacturer list for D38999/20K44PN?
Kaida lists a square-flange receptacle with shell09, four positions, crimp termination and passivated stainless steel.
How should the mounting interface be selected for D38999/20K44PN?
This is a wall-mount receptacle in shell 09. Compare flange mounting, panel opening, seal placement and rear clearance against the controlled installation drawing.
How should contact dimensions and keying be checked for D38999/20K44PN?
Request the complete D38999/20K44PN manufacturer drawing and the mating-half code before choosing contacts or a mating connector.
What should an RFQ include for D38999/20K44PN?
Include D38999/20K44PN, quantity, the mating-half code, installation drawing, required supplied contacts and documents.
Similar Products
Compare adjacent catalog configurations and confirm mating, keying and rear interface by drawing.
D38999/20K44PN · RFQ
Send the exact drawing and mating requirement
Include the mating part, cable or panel details, quantity and documentation required for your project.